ER Mini (Pre-Sale)

The ER Mini is a miniature advanced air vehicle. It is capable if doing all of the same operations of a drone, but don't call this a drone. The ER Mini is an eVTOL for gaining the new experience of Advanced Air Mobility (AAM), i.e. flying cars. This is first step to flying our full scale Ether Rider.

Are You ready for flying cars? Fly the ER Mini like a real life flying car

*Expected 1st Delivery: 6-8 Week after purchase

What’s Included:

  • E.R.-mini Aircraft

  • Radio Controller

  • Headset

  • Video Receiver

  • Carrying Case

  • RC Batteries

Features:

  • 12 inch Size

  • FPV HD

  • Headset and receiver (w/app)

  • eVTOL (Flying Car) flying experience

  • Safer, with protected propellers

  • Fly in confined spaces

  • Doesn't get stuck in trees

  • Open Source Flight Controller

  • Programmable

  • AAM Research Aid

  • Collectors item

  • Customizable Skin

Specifications:

  1. Controller Range: 1km

  2. Camera: RunCam Night Eagle 3, FPV, 1000TVL

  3. Video Transmitter: TS832 48Ch 5.8G FPV, 600mw 5km Long Range

  4. Motors: D2627-4900KV

  5. Battery: 3S - 4S

  6. Propeller Diameter: 50mm

  7. Optical Flow Sensor: No

  8. Obstacle Avoid Sensor: No

  9. Speed:

  10. Flight Time: 15 mins

  11. Weight: 2.5 lbs

  12. Flight Controller: F7 V2

  13. ESC: 30 Amp x4

  14. Receiver: FrSky R-XSR, ACCESS

  15. Radio Transmitter: FrSky Taranis X9 Lite

20211025_164508.jpg
IMG_5094.JPG
20211001_174956.jpg

 

 

Quick Instructions

  1. Install the 2 “18650” batteries into Radio Controller

    • Familiarize yourself with the Radio Controller buttons in the diagram above

  2. Power on the Radio Controller by long press on center power button

  3. Use selector to click through initial startup warnings

  4. Load battery into ER Mini and strap it in tight

    • Plug battery to ER Mini plug (inserting plug may be stiff at first, but will loosen over time)

  5. Wait until the ER Mini has completed initializing (all beeps have stopped)

  6. When you are ready to fly, you must first Arm the aircraft

    • Arm by toggling Ch5 - ARM switch to the downward position.

      • Downward = Arm ,

      • Upward = Disarm

    • After arming, wait a few seconds and the motors will spin. Ensure all motors are spinning.

  7. To fly, slowly increase the throttle until the aircraft begins to rise and continue to slowly increase throttle until fully airborne

    • Aircraft will take flight around 60% throttle, hovers at 60% throttle

  8. Use pitch and roll controls to maintain position in the air

  9. To land, slowly decrease throttle to 40%

    • increase to 50% if falling too fast

  10. For emergency, toggle the CH9 - Land/Safety switch to the downward position

    • The aircraft will automatically land slowly

  11. Once landed, quickly Disarm aircraft

    1. Disarm by toggling Ch5 - ARM switch to the upward position.

  12. For advanced programming, download and Install Mission Planner (https://ardupilot.org/planner/docs/mission-planner-installation.html)

FLY RESPONSIBLY

BE SURE TO FOLLOW FAA PART 107 GUIDLINES FOR UAS

ER Mini

Getting started.

How to get started with your ER Mini.

Watch full tutorial playlist here

https://www.youtube.com/playlist?list=PLYJveNKCp_0gr5Xc4NfvmgN93JNSao7-W